Detailed information
About Uteco Onyx 876, model 120, year 2006
Uteco Onyx 876
Model 120
Year: 2006
Gearless
8 colors (8+0)
Material width: 1250 mm (min.: 50% of the max. material width and according to the “tension range”)
Print width: 1200 mm
Min-max print repeat: 350-760 mm
Mechanical speed: 365 m/m
Printing speed: depends on type of material; repeat of printing cylinders and clichés; inks, lacquers and solvents; required print quality; solvent retention level
Materials: Gauge Polyethylene from 0.0008″ to 0.008″(max. width in this case 36″)(0,02 to 0,2 mm, max width 914 mm) , Polypropylene from 1 mil to 3 mil , No other material overcome 0.004″ (0,1 mm) on polyethylene
Tension range: 2-35 kg
Solvent based inks (the machine will be explosion-proof)
Total plate thickness: 0.067″ + 0.020″ (2.2 mm)
Power supply: 208 V, 3PH ± 5 % : with autotransformer supplied by Uteco
Voltage: 400 V -three phases with ground (T) and without neutral (N
Line frequency: 60 Hz ± 2%
Automatic turret unwinder “TA-U 800
Max reel diameter of unwinder: 800 m
3 (2+1) pneumatic expandable shaft of 76 mm I.D
2 shaft chucks by Svecom
1 Edge guide Kamberoler
Two unwinding stations each one driven by an AC motor.
Pneumatic dancing roll for the automatic control of the web tension.
Side register, manually adjustable, 50 mm
Aluminum idle rolls, dynamically balanced.
Automatic turret rewinder “TA-R 800”
Max reel diameter of rewinder: 800 m
2 shafts of I.D 76 mm and 2 shaft chucks by Svecom.
Two rewinding positions each one driven by an AC motor
Transmission to the color units through electronic shaft.
1 edge guide shifting
2 safety side doors, positioned between color units with safety microswitches
Motorization of the central impression drum of the printing sleeve cylinders and of the anilox rolls by means of synchronous AC motors, brushless type
The longitudinal register is motorized
The side register is motorized operating directly on the union supporting the air mandrel. Max. correction range: ± 10 mm
8 Closed chamber doctor blades with 8 splash guards.
No sleeves and no anilox available.
Double-diaphragm pneumatic pump, installed with ink inlet/outlet hoses
Longitudinal blade slitting device composed of 3 blades
Drying system: 2 hot air gas burners, 2 thermoregulations for gas burners, 2 manual air recirculation.
Video camera brand “BST ” type “SUPER HANDY SCAN 3000”
Mechanical speed: 365 m/m
Voltage: 400 V -three phases with ground (T) and without neutral (N)
Line frequency: 60 Hz ± 2%
Pneumatic dancing roll for the automatic control of the web tension
Location Information
About Uteco Onyx 876, model 120, year 2006
Available in region: Log in to see location