Carint SLP 1508 mod. 120, year 2006

Share

Detailed information

About Carint SLP 1508 mod. 120, year 2006

Carint
SLP 1508 mod. 120
Year: 2006
8 col.
Max printing width: 1200 mm
Max passage width: 1250 mm
Plate thickness: 1,14 mm + 1,70 mm+2,54 mm + 2,84 mm
Stick thickness: 0,5 mm
Gearing pitch:  5mm
Reel diameters of unwinder and rewinder: 800 mm
Internal core dia.: 76 mm and 90 mm external
Electrical supply: 380 V – 50 Hz
Drying system: gas
Speed: 300 m/nmin.
Solvent based
Tension range: 20 N – max 200 N
Cast iron frames 80 mm tickness
Remote control for longitudinal registers
Remote controller side registers
Printing deck foreseen for sleeves on fixed mandrels
Sleeves and or plate cylinders
Integral shafts and anolox rollers
Fully enclosed doctor blades system
Auto deck positioning and remote micrometric adjustment
Step motors with incremental encoders
Longitudinal pre-register system
Automatic hydraulic lock down of slides and sliding blocks
2 control panels are supplied to control all printing stations
4 fan drying system width driven rollers
2 x 210 mm O.D. chromium plated single wall chill rolls driven by A.C. motor
Computerised  control system SIEMENS S7 300
TECKMAN press and data management system and tele assistance
SEMI-automatic turret unwind type W-8000
Automatic Turret Unwind RID 80 (with 2 A.C. motors for the automatic tension control.
Razor Slitter complete unit
Bow roller
Ladder and catwaalk
Lighting system on the printing group
2 electrical hoist for plate cylinders lifting (max load 250 kg each)
4 air expandable shafts
8 pneumatic ink pumps complete with cover and tank
2 tension indicating load cells
2 gas packages of 100.000 Kcal.
1 standard set of 8 mandrels od 105,158 for sleeves
1 extra mandrel 105,158 for plate sleeves  mounting on mounter proofer
1 standard set of 8 carbon fibre carriers  by Rossini from repeat at 565 mm to 670 mm external diameter of 172.004 for mandrel of external dia. 105,158
Edge guide before printing FIFE Kamberoller  two sensors electromechanical system
Edge guide after printing FIFE shifting rewind single sensors ultrasonic system manually controller + photoelectric eye for printing read-out.
Videocamera inspection system type BST Proscan
Immediately available
176 sleeves and 20 anilox

Location Information

About Carint SLP 1508 mod. 120, year 2006

Available in region:   

For further details please fill the form below:

, , ,
Somaflex Optima 820-8EG, year 2015
Uteco Emerald 825, year 2001

Related Posts

Menu
error: Content is protected !!