About Bonardi model Sante 1400, year 2016
Model Santè 1400
Solventless laminator for bi-components adhesive solventless
With digital motors drivings and frequency variation
Max width: 1400 mm
Max material width: 1450 mm
Production speed: 350 m/min.
Max unwinder reel diameter: 1000 mm
internal core: 76 and 152
Max reel dia of rewinder: 1050 mm
Internal diameter of rewinder: 152 mm
Electrical voltage and frequency: Eurovoltage
Primary material for the coating: BOPP 12-80, PETP 10-30, LDPE/LLDPE 30-200, OPA 12-18, Nylon cast 30-80, ALU 12 40, PP CAST 60-150, PAPER 40-150 g
Secondary material for the lamination: BOPP 12-80, PETP 10-30, LDPE/LLDPE 30-200, OPA 12-18, Nylon cast 30-80, ALU 12-40, PP CAST 60-150, PAPER 40-150 g
Important note: the materials needed to be treated in the surface with a minimum value of 38 DIN. By less values it is not guaranteed the result.
Compressed air when machine working: 5-6 l/min. – 6/8 bars
When you change sleeve (conical) 10 bars for few seconds (the time for the sleeve change correspond to the work change time, when machine doesn’t work and speed is zero).
For cooling system. no. 2 points (thermoregulation of the rolls).
Water- temperature 15-20 degrees, pH 7-8,5. 2,5-4 bars
Consumption: 10-12 l/min.
In case of fridge to count 2.000 Kcal/h. (The machine doesn’t need thermic generators. The small thermal needs are satisfied from electrical resistances for which the complex power requested is indicated and included in the data above.
Pump system: size 1000 x 810 x h 11760 mm, weight 468 kg, specific weight: 500 kg.
Application station/ Primary under: size 2800 mm x 1800 mm, weight about 4000 kg, specific weight: 800 kg sum
Color: light grey RAL 9018
The tensions of materials are managed by the dancing rolls and loading cells
execution in compliance with the European regulations in force for the machinery directive
Installed power 65 Kw
Medium electricity needed when machine is in use: 35 Kw,400V/3ph+t/50 Hz (without neutral)
Overall size: H 1410 mm, L805 mm, W 925 mm